Filter
Top Products
CHAPTER 4 NDA-24298
Page 648
Issue 1
ARTI : Assignment of Trunk Application Data
20 DVRST
Call restriction while Tie Line is backed up on ISDN.
0=No restriction
1 = Speech call restriction (Speech. 3.1 kHz audio, 7
kHz audio calls are restricted)
2 = Data call restriction (Unrestricted digital, restricted
digital and Video data are restricted.)
3 = Both Speech and Data calls are restricted.
21 RSCT
Call restricted by Temporary Route Information
0 = No restriction 1 = Restriction
Note: This data is effective when TMPRT = 1.
22 ROCG
Outgoing Call Account by Temporary Route Information
0 = Not used 1 = Effective
Note: This data is effective when TMPRT = 1.
23 RICG
Incoming Call Account by Temporary Route Information
0 = Not used 1 = Effective
Note: This data is effective when TMPRT = 1.
24 STSENQ
Status Inquiry Message Send
0 = Out of service
1 = In service
25MMNPASSWhen assigning this data, always enter zero (0). 0000
26 DLTK
(Japan only)
When assigning this data, always enter zero (0).
0000
27 CALN
(Japan only)
When assigning this data, always enter zero (0).
0000
28 NETINT
(Japan only)
When assigning this data, always enter zero (0).
0000
29 INBAND When assigning this data, always enter zero (0). 0000
30 RETMSG
(Australia only)
Return Massage for Connect ISDN LINE with Analog
Trunk
0 = CALL PROC. + ALERT
1 = CALL PROC. + ALERT or CALL PROC. +
PROGRESS
31 ANI
Timing to demand ANI Information
0 = There is no ANI demand at Incoming call
1 = After receiving 1st digit
2 = After receiving 2nd digit
3 = After receiving 3rd digit
4 = After receiving 4th digit
5 = After receiving 5th digit
6 = After receiving 6th digit
7 = After receiving 7th digit
CDN
ROUTE NUMBER
TRUNK DATA