NDA-24298 CHAPTER 4
Page 927
Issue 1
ASPAN : Assignment of Special Access Code for NDM
ASPAN: Assignment of Special Access Code for NDM
1. General
This command assigns the numbering plan data of the Network Control Node (NCN). The data assigned by this
command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the
NDM at each Local Node (LN).
2. Precautions
1. This command is used for the Business/Hotel (for Admin. station only) Application.
2. The applicable Tenant Number (TN) range is designated by the ASYDN command, SYS 1, INDEX 8. If
the numbering plan is common for all tenants (ASYDN, SYS1, INDEX 800, bit1 = 1), assign TN
parameter as “1” for all tenants.
3. For detailed information, see the NEAX2400 IPX Fusion Network System Manual.