CHAPTER 4 NDA-24298
Page 598
Issue 1
AAKP : Assignment of ATT Key Position
AAKP: Assignment of ATT Key Position
1. General
This command sets the functions of the top row of Incoming Call Identification (ICI) keys for answering
incoming calls at the Attendant Console.
2. Precautions
1. This command can be executed under one of following conditions:
(a) The ATI circuit card is not mounted.
(b) The ATT has been made busy using the MB switch on the ATI circuit card.
(c) The DAY/NIGHT key on the ATT is set to the NIGHT position.
2. When the location of keys has been changed, the number of waiting call display (ASYD, SYS2, INDEX 8
and INDEX 9) is invalid for the ICI key (Off Hook Alarm Priority Call) programmed by this command.
3. The Attendant Console number (ATN) is the number assigned at the TK parameter of the ATRK
command.
4. The maximum number of Attendant Consoles should be assigned by the ASYD command, SYS 1,
INDEX 9.
5. The location of the keys that can be set by this command is shown in Figure 4-28.