CHAPTER 4 NDA-24298
Page 414
Issue 1
ASTN : Assignment of Station Number
ASTN: Assignment of Station Number
1. General
This command changes the physical station number assigned to a particular LEN.
2. Precautions
1. The primary digit, the number of digits, and the kind of service (SRV = 1) which is designated by the
ANPD and ASPA command affect the new station number. The new station number must be assigned
according to the numbering plan data.
2. The number of Station Number (STN) digits is designated by the ASYD command, SYS1, INDEX16.
3. This command can be used only when the number of the station to be changed is in idle status.
4. Update the station number changed in this command on the data sheet in the ASDT command.
3. Data Entry Instructions
OLD STATION NUMBER
(STN)
NEW STATION NUMBER
(NEW STN)
REMARKS
TENANT
NUMBER
(TN)
NEW STN
Enter the new station number corresponding
to the existing numbering plan.
STN
The station number has been
assigned by the ASDT command.