Filter
Top Products
Operating Examples
2 Ć68
AWG2021 User Manual
Example 4: Loading and Saving Files
NOTE. When the instrument is switched off, the data in the internal memory is
erased. Accordingly, it is necessary to copy any files that have been created or
edited onto a floppy disk or into the instrument’s internal non-volatile memory
(NVRam).
In Example 4, you will load and save the file created in the previous operation.
LOAD menu. Used to enter files from a floppy disk or the instrument’s internal
NVRam.
SAVE menu. Used to save files that have been created or changed onto a floppy
disk or the instrument’s internal NVRam.
To save files into internal non-volatile memory (NVRam), perform the following
steps:
1. Press the LOAD/SAVE button in the MENU column.
2. Select Device from the bottom menu.
3. Select NVRam from the side menu.
4. Select Save from the bottom menu.
Figure 2 -58 shows the SAVE menu displayed.
Saving Files