Filter
Top Products
LOAD/SAVE Menu
AWG2021 User Manual
3 Ć259
Supported Floppy Disk Files
Table 3-20 shows a list of file name extensions denoting the type of disk files
that can be loaded to the internal memory of the AWG2021.
Table 3Ć20: Supported Floppy Disk Files
Extension Description Result of Load Operation
.ISF Waveform data files saved in ISF
format (Instrument Specific Format)
using the waveform save function in
the S34TDS1 Data Manager softĆ
ware.
.ISF, .WVN, .WFB ,.WFM ,.WAV and
.WDT files are automatically conĆ
verted into .WFM files in the
AWG2021 instrument's internal
format and then stored in internal
memory When this is done except
.WVN Waveform data files saved using the
waveform save function in the
S37UT01 Utility software.
memory.
Wh
en
thi
s
i
s
d
one, excep
t
for the .WFM file, the name of the
file is retained as is, only the extenĆ
sion chan
g
ed to .WFM.Inthe.WFM
.WFB Waveform data files saved in binary
format on a DSA600A series instruĆ
ment.
sion changed to .WFM.Inthe.WFM
file, file name and extension are as it
is.
.WFM Waveform data files created in a
TDS series instrument
.WAV Waveform data files created in the
LeCroy EASYWAVE software.
.WDT Waveform element files created in a
Yokogawa Electric AG series arbiĆ
trary waveform generator.
.EQA Equation files in MSĆDOS text format
created in a PC editor, etc.
.EQA files are automatically conĆ
verted into .EQU files in the
AWG2021 instrument's internal
format and then stored in internal
memory. When this is done, the
name of the file is retained as is,
only the extension changed to .EQU.
When the following items are written
to the .EQA file, these items are
reflected in the .EQU file.
# COMMENT: <comment>
# WAVEFORM POINTS =
<point count>
All of these files are displayed in the Catalog menu screens for Disk in the
UTILITY menu and Device Disk in the LOAD/SAVE menu, the same as files
with other extensions. The extension for each file is shown in the Type column.