Filter
Top Products
Operating Examples
2 Ć54
AWG2021 User Manual
In this procedure, you will create a sequence file that combines two files: the
waveform file created with the waveform editor (SAMPLE–1.WFM) and the
waveform file created with the equation editor and then compiled (SAM-
PLE–4.WFM).
1. Select New Sequence from the side menu. Figure 2 -41 shows the sequence
editor menu.
Figure 2 Ć41: Sequence Editor Menu Display
2. Use the general purpose knob to select the waveform file from the Catalog
to go on the first line of the Destination list. Select SAMPLE–1.WFM
here.
3. Press the VALUE button on the front panel.
The file SAMPLE–1.WFM will be inserted in the first line of the Destina-
tion list. The inverted video cursor will move to the Repeat column on the
same line.
4. Now you will set the repetition count for the SAMPLE–1.WFM file to 2.
Press “2” and ENTER in that order. The inverted video cursor will move to
the second line in the Destination list.
Creating a Sequence File