A SERVICE OF

logo

Open as PDF
next previous
Operating Examples
2 Ć60
AWG2021 User Manual
12. Enter SAMPLE–6 as the name for the autostep file. See Step 24 of the
waveform file creation procedure for instructions on how to enter the file
name.
13. When the file name has been entered, select O.K. from the sub-menu.
The autostep file that you have created will be saved in the internal memory
under the name SAMPLE–6.AST and the initial menu will reappear.
1. Press the SETUP button in the MENU column. Figure 2 -49 shows the
SETUP menu displayed.
Figure 2 Ć49: SETUP Menu
2. Select Waveform Sequence from the bottom menu.
3. Turn the general purpose knob to select the SAMPLE–1.WFM file.
4. Press the front panel ENTER button.
5. Select Clock from the bottom menu.
6. Select Internal Clock from the side menu.
Setting the Output
Parameters