Filter
Top Products
SETUP Menu
3 Ć214
AWG2021 User Manual
SETUP Menu Display
Figure 3 -153 shows the graphic mode for SETUP menu display. A description
for each callout follows.
1
3
2
5
6
7
8
2
4
Figure 3 Ć153: SETUP Menu (Graphic Mode)
(1) Display Area for CH1
Waveform/Sequence
Waveform
Shows the waveform or sequence file waveform indicated in
the CH1 file input column. If the file is locked, an L is shown in
the upper right corner of this area.
(2) CH1 Clock Setting Shows the clock source and the frequency for the internal
clock.
(3) CH2 Clock Setting For instruments with Option 02 installed (CH2), shows the
internal clock frequency for CH2 and the value for frequency
division of the CH1 clock.
(4) CH1 Operation Setting Shows the operation setting for the CH1 waveform.
(5) CH1 Output Parameter
Settings
Shows the filter applied to output, the amplitude of the output
waveform and the offset setting.
(6) CH1 Output On/Off Shows whether CH1 output is on or off. To turn CH1 output on
or off, use the CH1 On/Off button on the front panel.