EDIT Menu
AWG2021 User Manual
3 Ć47
3
1
2
Figure 3 Ć26: Menu Display When Draw... is Selected
(1) Point Cursor Is used to draw points. When this cursor can be moved, the
direction in which it can be moved is shown by the arrows.
(2) XĆY Coordinate Axis Shows the X and Y coordinates of the point cursor described in
(1) above. When the coordinates for a coordinate axis are
displayed inverted, it indicates that the cursor can be moved in
that direction.
(3) Button Operations
Pressing the CURSOR button toggles the active vertical bar cursor from left to
right and back again. Pressing the VALUE button toggles the direction in which
the point cursor can be moved from up-down to left-right and back again.
1. Move the left and right vertical bar cursors to define the area within which
the waveform will be drawn and then select Draw... from the side menu.
The point cursor will appear in the middle of the vertical axis between the
left and right vertical bar cursors.
2. Press VALUE button on the front panel.
