Filter
Top Products
EDIT Menu
AWG2021 User Manual
3 Ć157
Insert Other Equation File. Use Insert Other Equation to select an equation file
from internal memory (see Figure 3 -116). An equation file is inserted from this
list into the equation list.
Figure 3 Ć116: Menu Displayed When Insert Other Equation is Selected
1. Use the same procedure as described in Cutting a Line to line up the inverted
display cursor with the line where the other equation file is to be inserted.
2. Select Insert Other Equation from the side menu.
3. Use the general purpose knob to select the equation file to be inserted.
4. After selecting the file, press the O.K. side menu button to insert the selected
file directly before the inverted cursor within the equation list. Press the
Cancel side menu button to cancel the selection and return the system to the
equation editor.
When Setting is selected from the bottom menu, the number of waveform points
for equation file compilation and waveform file creation can be set. Figure
3 -117 shows the menu for when Setting is selected.
Setting Waveform Point
Count