Filter
Top Products
LOAD/SAVE Menu
3 Ć258
AWG2021 User Manual
Auto Loading
Use the side menu of the Auto Load to automatically load files from the mass
memory into the internal memory when the instrument is switched on.
1. Select Auto Load from the bottom menu.
2. Select an item from the side menu.
From Disk When the instrument is switched on, files are loaded
automatically from the floppy disk to the internal
memory. In this case, all the files in the AWG2021
directory are loaded. If there is no AWG2021
directory, no auto load is carried out. This directory
can be created with Disk on the UTILITY menu.
For details, see the explanation in “Using the Disk
Menu” in Section 4E “UTILITY Menu.”
From NVRam When the instrument is switched on, all the files in
the non-volatile memory are loaded automatically
into the internal memory.
Off Switches off auto loading.
When from Disk or from NVRam is selected from the side menu, go to the
next procedure.
3. Switch the AWG2021 power off, then on again. Double check that files are
automatically loaded from mass memory to internal memory the way you
selected from the side menu.