Filter
Top Products
EDIT Menu
AWG2021 User Manual
3 Ć123
Operation ( More 3 of 3 ) Data Expand...
Factor
Go Back
Execute
1. Move the vertical bar cursors to define the section of the data to be expand-
ed. Then select Data Expand... from the third page of the side menu (More
3 of 3).
2. Select Factor from the sub-menu.
Factor is used to set the degree of expansion to any value between 2x and
10x.
3. Using the numeric keys or the general purpose knob, set the degree of
expansion.
4. Select Execute from the sub-menu. The section of the waveform between the
vertical bar cursors will be expanded to the designated degree, and the
waveform point size will increase accordingly. Figure 3 -88 shows the screen
before and after the data between the vertical bar cursors is expanded by a
factor of 2.
AfterBefore
Figure 3 Ć88: Expanding Waveform Data
5. Select Go Back from the current sub-menu. The system returns from the
Data Expand... sub-menu to the previous side menu.