Filter
Top Products
EDIT Menu
3 Ć120
AWG2021 User Manual
Destination selects the destination to which the waveform data selected with
Source will be copied. Data line DATA 11 – DATA 0 or marker (MARK-
ER) can be selected as the copy destination. From the copy source to the
copy destination is indicated with an arrow.
4. Select Execute from the sub-menu. The data is copied with the specified
conditions. Figure 3 -86 shows the screen before and after the section of
waveform data between the vertical bar cursors on line DATA 0 is copied to
line DATA 11.
AfterBefore
Figure 3 Ć86: Copying Lines
5. Select Go Back from the current sub-menu. The system returns from the
Copy Line... sub-menu to the previous side menu.
Use Exchange Line... to take the data between the designated vertical bar
cursors on one line and interchange it with the data on another line. The
following diagram shows the menu configuration for the Exchange Line... item.
Operation ( More 2 of 3 )
Exchange Line...
Go Back
Execute
Source
Destination
1. Move the vertical bar cursors to define the section of the data to be ex-
changed. Then select Exchange Line... from the second page of the side
menu (More 2 of 3).
Exchanging LInes