Filter
Top Products
SETUP Menu
AWG2021 User Manual
3 Ć223
1.25V
-1.25V
-1V
1V
0V
0V
Adder
CH1 Offset Setting
CH1 Output Waveform
Offset 0 V
-1V
CH2 Waveform
Amplitude 2.5 V
CH1 Waveform
Amplitude 2 V
CH1 Amplitude Setting
1V
0V
Offset 0 V
CH2 Output
Parameter Settings
Figure 3 Ć157: Adding CH1 Waveform and CH2 Waveform
The adder has a 30 MHz bandwidth.
The actual value is (
1
@
5
the CH2 setting) + the CH1 setting. The added value of
CH2 is
1
@
5
the setting and is displayed at the bottom right of the CRT screen (see
example below).
Max:
Min:
0.2500V/50W
-0.2500V/50W
NOTE. When addition results in an output that exceeds 5 Vp-p, the signal may be
distorted.
External AM The CH1 waveform output is amplitude modulated by the
external signal input from the rear panel CH1 AM IN
connector. See Figure 3 -158.