Filter
Top Products
UTILITY Menu
AWG2021 User Manual
3 Ć269
NOTE. A file hierarchy with multiple layers can be created on the disk using up
to 54 characters including the \ character. The shorter the directory name, the
deeper the levels that you can create. When the directory display becomes too
large for the display area window, the initial section is omitted.
Example: Creating a Directory. For example, to create a sub-directory called
AWG2021, such as root directory: AWG2021 (DIR) – perform the following
steps.
Root directory
AWG2021 (DIR)
If the AWG2021 sub-directory has been created ahead of time, the files under the
AWG2021 directory are automatically loaded into internal memory by the
LOAD/SAVE menu Auto Load setting, when power is switched on.
The following procedure assumes that the current directory is the root directory.
If the current directory is not the root directory, use Change Directory to change
the current directory to the root directory. (See the Step 5 and the following
steps.)
1. Select Disk from the bottom menu.
A list of the files and directories in the root directory of the inserted floppy
disk is displayed on the screen. See Figure 3 -180. Catalog:Disk \ on the
CRT screen shows that the current directory is the root directory.