Filter
Top Products
UTILITY Menu
AWG2021 User Manual
3 Ć293
2. Select Calibrations from the side menu.
3. Turn the general purpose knob to select the desired calibration. To execute
all the calibrations one after another, select All.
4. Select Execute from the side menu. The selected calibration item is carried
out.
If the calibration finishes without a problem, Pass is displayed on the Result
column. If an error occurs, Fail is displayed. If the instrument fails a
calibration, an error code is displayed in the Code column.
NOTE. If an error occurs, contact our representative closest to you.
Pattern Display (For Instrument Adjustment). This item is used when adjusting the
instrument. As it is not used for operation, a description is omitted here.