Filter
Top Products
Appendix C: Performance Verification
AWG2021 User Manual
CĆ49
TTL Digital Data Out Cable
D1
D0
GND
CLK
GND
2×13 Header
D11
Figure CĆ23: Output Pins on the TTL Digital Data Out Cable
4. If Option 02 is installed, check the CH2 digital data output signals:
a. Change connection: Change the connection for the TTL digital data out
cable from CH1 DIGITAL DATA OUT connector to CH2 DIGITAL
DATA OUT connector.
b. Repeat the step2 and 3 to check the CH2 digital data output signals.
5. Turn off equipment output and disconnect test hookup:
a. Disable power supply output: Turn off power supply output.
b. Remove connections: Disconnect all connections to the AWG2021.