Filter
Top Products
EDIT Menu
AWG2021 User Manual
3 Ć83
14. Select Execute from the sub-menu.
If the number of points in the waveform between the vertical bar cursors in
the copy source is the same as the value set for Interval, the copied
waveform will be displayed repeating at the interval designated with
Interval. In the example shown in Figure 3 -64, both the waveform point
size and the Interval value are set to 500.
0 500 999
Figure 3 Ć64: Waveform Copying (number of points in waveform = Interval value)
If the number of points in the waveform between the vertical bar cursors in the
copy source is less than the value set for Interval, data at level 0 (in other words,
a straight line) will be added at the end of the waveform. Figure 3 -65 shows an
example in which the waveform point size has been set to 500 and the Interval
has been set to 600. Data at level 0 has been added from point 500 to point 599;
the next waveform begins from point 600.