EDIT Menu
3 Ć122
AWG2021 User Manual
Operation ( More 3 of 3 )
Logical Function...
Func Type
Source
Destination
AND
NAND
OR
NOR
EXĆOR
EXĆNOR
Execute
Go Back
Types of Logical Operation. You can choose from the following six logical
operation options in the Func Type sub-menu:
AND
NAND
OR
NOR
EX-OR
EX-NOR
See “Logical Operation” in Appendix F for a description of each of these
operations.
1. Move the vertical bar cursors to define the section of the data to which a
logical operation is applied. Then select Logical Function... from the third
page of the side menu (More 3 of 3).
2. Select Source from the sub-menu. Turning the general purpose knob, select
the first data line or marker for logical operation.
3. Select Destination from the sub-menu. Turning the general purpose knob,
select the other data line or marker for logical operation. The calculated
result will replace the data line or marker designated with Destination.
4. Select Execute from the sub-menu. Logical operation will be performed for
the selected lines.
5. Select Go Back from the current sub-menu. The system returns from the
Logical Function... sub-menu to the previous side menu.
Use Data Expand... to expand the section between the designated vertical bar
cursors for all of the data lines and marker. The following diagram shows the
menu configuration for the Data Expand... item.
Expanding Waveform Data
