Filter
Top Products
EDIT Menu
AWG2021 User Manual
3 Ć135
Waveform data can be edited at the waveform point, regardless of what item is
selected in the bottom menu.
Move the line cursor to the data point to be edited.
1. Press the CURSOR button on the front panel to move the line cursor.
2. When the CURSOR button is pressed, the active line cursor is toggled
between Upper and Lower.
3. Use the general purpose knob to move the active line cursor to the time or
point value to be edited.
Enter the waveform data
4. Press the VALUE button on the front panel to input the waveform data with
the set cardinal number.
Within the inverted display active line cursor is a block cursor. The data in
the block cursor can be changed.
5. Use the z and ! buttons on the front panel to move the block cursor to the
data to be changed.
When the block cursor is at the left end of the DATA, pressing the z button
moves the block cursor to MARKER for the previous waveform point or
time value. When the block cursor is at the MARKER, pressing the !
button moves the block cursor to the left and of the DATA for the subse-
quent waveform point or time value.
6. Data can be input with the numeric keys. Pressing numeric or character keys
unrelated to the cardinal number you have designated will have no effect on
the data.
When a number or character is input, the block cursor moves to the next
character to the right.
Use Operation to edit waveform data for the area between the upper and lower
line cursors.
The following list shows the names and functions of the items in the side menu.
Cut Cutting waveforms
Copy to Buffer Copying waveforms
Paste from Buffer Pasting waveforms
Insert Other Waveform Inserting other waveform data
Editing Waveform Data
Editing Waveform Data in
Table Display