Filter
Top Products
EDIT Menu
3 Ć56
AWG2021 User Manual
4. Press the Invert button in the sub-menu to select Vertical.
5. Select Execute from the sub-menu. The waveform is inverted vertically with
the specified conditions. Figure 3 -33 shows an example of the waveform
before and after it is inverted vertically.
AfterBefore
Figure 3 Ć33: Vertically Inverted Display
6. Select Go Back from the current sub-menu. The system returns from the
Invert... sub-menu to the side menu.
Clip Function. Use Clip... to clip (remove) any waveform data between the
vertical bar cursors that is above or below the set level. The following diagram
shows the menu configuration for the Clip... item.
Operation (More 2 of 3)
Clip...
Clip
Upper
Lower
Level
Go Back
Execute
1. Move the left and right vertical bar cursors to define the editing area for
clipping, then select Clip... from the second page of the side menu (More 2
of 3). A horizontal (broken) line showing the clip level will appear.
2. Press the Clip button in the sub-menu to select Upper or Lower.