Filter
Top Products
EDIT Menu
3 Ć186
AWG2021 User Manual
When you select Operation in the bottom menu, the following items appear in
the side menu:
Cut Step
Copy Step
Paste Step
Insert New Step
Append New Step
Insert Current Setup
Swap Channel Contents...
Cutting a Step. Use Cut Step if you wish to delete a step in the autostep file that
you have programmed.
1. Select Operation from the bottom menu.
2. Using the z and ! buttons on the front panel, move to the step to be
deleted.
3. Select Cut Step from the side menu.
When Cut Step is selected, the current step is deleted. All of the steps after
the one that you have deleted will move up one step. To restore this step to
its original state, select Undo from the bottom menu or Paste from Buffer
from the side menu.
Copying and Pasting a Step. Use the Copy Step and Paste Step items to copy a
step in the program and paste it to another step.
1. Move to the step to be copied, using the same procedure as in “Cutting a
Step” above.
2. Select Copy Step from the side menu.
When Copy Step is selected, the current step is placed in the paste buffer.
This item has no effect on the CRT display.
3. Use the z and ! buttons on the front panel or the Jump item in the bottom
menu to move to the step to which the step in the paste buffer is to be pasted.
4. Select Paste Step from the side menu.
All of the steps after the one that has been pasted will move down one step.
Editing Functions