Filter
Top Products
Appendix B: Performance Characteristics
BĆ4
AWG2021 User Manual
Table BĆ1: Electrical Characteristics (Cont.)
Characteristics Description
AM
Range 2 V
pĆp
(-1V 1V) for 100% modulation
Impedance 10 kW
Clock
Impedance 50 W
Function Generator
Waveform Shape Sine, Triangle, Square, Ramp, Pulse
Output Parameter All of these values with the exception of frequency can be set independently for
each channel. Frequency settings apply to each channel.
Frequency 1.000 Hz to 2.500 MHz
Amplitude Can be set between 50 mV and5Vin1mVincrements
Offset Can be set between ±2.5 V in 5 mV increments
Polarity Normal, Invert
Duty 0% to 100% Pulse only. Can be set in 1% increments
Operating Mode Continuous mode
Auxiliary Output
Marker Signal 2.5 V into 50 W, generated at the starting point of the waveform. The pulse
width will vary depending on the frequency.
Display
CRT
Display Area 132mm(5.2 inches) horizontally by 99mm( 3.9 inches) vertically
Resolution 640 (H) ± 480 (V) pixels
AC Power Source
AC Line Power
Fuse Rating 6A fast blow, 250 V, UL198G(3AG) or 5 A (T), 250 V, IEC127
Battery
Type Li3 V, 650 mAH
Table B-1-1 Period Jitter (CH1 Marker 1 Out)
Clock=250MS/s
Clock=100MS/s
StdDev Pk-Pk StdDev Pk-Pk
11.0 ps 60.0 ps 10.5 ps 50.0 ps