Filter
Top Products
SETUP Menu
AWG2021 User Manual
3 Ć225
Setting Filter
The filters selections are: 50, 20, 5, 1 MHz and Through (no filter).
To set Filter, perform these steps:
1. Select Filter from the bottom menu. The filter icon will be highlighted on
the screen.
2. Select the channel from the side menu.
3. Turn the general purpose knob to select the desired filter.
Setting Amplitude and Offset
Use Amplitude and Offset to set the output amplitude and offset for the vertical
axis 12-bit full scale voltage. These values are terminated with 50 W.
Figure 3 -159 shows the display when the amplitude is set to 5 V and the offset
is set to 1 V.
Max
Min
Figure 3 Ć159: Setting Amplitude and Offset