Filter
Top Products
EDIT Menu
AWG2021 User Manual
3 Ć175
Figure 3 -126 shows the general autostep editor display. A description for each
callout follows.
1
3
2
4
5
6
Figure 3 Ć126: Autostep Editor CRT Display
(1) File Name The name of the autostep file being edited; if the name has not
been set yet, ********.AST is displayed.
(2) Step No. Indicates the step number in the program.
(3) CH2 File Setting Area
(Option 02)
This setting area is only effective when Option 02, with CH2, is
installed. Indicates the file set for CH2 in the step indicated by
(2). The waveform and output parameters for that file are
shown in this area. These output parameters may be changed.
(4) CH1 File Setting Area Indicates the file set for CH1 in the step indicated by (2). The
waveform and output parameters for that file are shown in this
area. These output parameters may be changed.
Autostep Editor Menu
Display