Filter
Top Products
EDIT Menu
3 Ć112
AWG2021 User Manual
Inserting a Blank Line. Pressing the ENTER key causes a blank line to be inserted
above the data item marked by the cursor.
NOTE. Blank lines cannot be inserted if there are more than two consecutive
blank lines or if there are more than 16 lines in all.
Defining Data. Move the cursor to the desired location to enter a value on the
numeric keys. The value at that location will be replaced by the one you have
entered. Enterable values will vary depending on the location of the cursor:
In the Source Data Pattern area, only numeric keys 0 through 7 are
operational.
In the Converted Code area, only numeric keys 0 through 3 are operational.
Deleting Data. Pressing the delete key will delete the data indicated by the cursor.
When a data item is deleted, all of the subsequent data items will move forward
one space. If there is no data at the cursor position, the cursor will move one
position to the left.
Deleting a Line. When all of the data on the line indicated by the cursor has been
deleted, that line will also be deleted and all subsequent data will move up one
line.
Setting Items. The Source Data Pattern is used to write the pattern for input
data.
0 Data at that position is LOW
1 Data at that position is HIGH
2 The preceding Converted Code data item is 0
3 The preceding Converted Code data item is 1
4 The preceding Source Data Pattern data item is 0
5 The preceding Source Data Pattern data item is 1
6 The following Source Data Pattern data item is 0
7 The following Source Data Pattern data item is 1
H 2, 3, 4 and 5 can only be written at the beginning of Source Data Pattern
H 6 and 7 cannot be written at the beginning of Source Data Pattern
H Only the data for the immediately preceding time can be referenced with 2,
3, 4 and 5
H 6 and 7 are effective as long as the pattern can be written