Filter
Top Products
EDIT Menu
3 Ć50
AWG2021 User Manual
In the horizontal direction, the shift value is the number of points or time; in the
vertical direction, the shift value is specified with the vertical value.
1. Move the left and right vertical bar cursors to define the section of the
waveform to be shifted. Then select Shift... from the second page of the side
menu (More 2 of 3).
2. Press the Shift button in the sub-menu to select Horizontal.
The Shift side menu item selects the direction in which the waveform data
between the vertical bar cursors is to be shifted.
Horizontal shift allows you to shift all of the points or time values in the
whole editing area; it can be set to either a positive or a negative value.
When the shift value is positive, the waveform moves to the right; when it is
negative, the waveform moves to the left. Data that protrudes outside the
range defined by the vertical bar cursors as a result of shifting is added to the
end of either the right or left vertical bar cursor, depending on whether the
shift value is positive or negative.
3. Select Value from the sub-menu.
4. Use the general purpose knob or the numeric keys to input the shift point
value. This value will be expressed as either number of points or time,
depending on the horizontal unit setting (the value set with Horiz. Unit
under Setting).
5. Select Execute from the sub-menu. The waveform is shifted horizontally
with the specified conditions.
Figure 3 -28 shows the waveform between the vertical bar cursors shifted
right 100 points.