Filter
Top Products
Operating Examples
2 Ć36
AWG2021 User Manual
Example 3: Creating Files and Arbitrary Waveform Outputs
When using the instrument for arbitrary waveform output, you should first use
the editors in the EDIT menu to create the waveform to be output. In this
operation, you will create an arbitrary waveform with the editors, and then you
will set the conditions for waveform output (frequency, amplitude, offset, etc.) in
the SETUP menu. Finally, you will set the operation mode in the MODE menu
to output the waveform.
In Example 3, we will practice the following series of operations:
Creating a Waveform File
Creating Arbitrary Waveforms Using the Point Draw Function
Creating Waveforms Arithmetically
Creating an Equation File
Creating a Sequence File
Creating Autostep Files
Setting the Output Parameters
Setting Operation Mode and Waveform Output
Use the waveform editor graphic display to create a waveform file by performing
the following steps:
1. Press the EDIT button in the MENU column. Figure 2 -24 shows the initial
menu displayed.
Creating a Waveform File