Filter
Top Products
Overview
2 Ć12
AWG2021 User Manual
(30) CLOCK OUT
Connector
This connector is used for internal clock output. The output
level is1Vwitha50W termination.
(31) CH1 MARKER 2 OUT
Connector
The CH1 MARKER 2 OUT connector provides a userĆspecified
CH1 marker 2. The output level is 2.5 V with a 50 W
termination.
(32) CH2 MARKER 2 OUT
Connector (Option 02)
The CH2 MARKER 2 OUT connector provides a userĆspecified
CH2 marker 2. The output level is 2.5 V with a 50 W
termination.
(33) CLOCK IN Connector This connector is used for external clock input. This connector
allows external clock signals with a maximum input voltage of
±2 V into a nominal 50 W input impedance.
(34) CH1/CH2 DIGITAL
DATA OUT Connector
(Option 04)
These connectors are used to output CH1/CH2 digital data.
The output impedance will be at the TTL level at 50 W with no
termination. For details, see Appendix A Option 04."
(35) CH1 DIGITAL DATA
OUT Connector (Option 03)
This connector provides digital data differential ECL output. It
is mounted in the fourth slot from the top. For details, see
Appendix A Option 03."