UTILITY Menu
AWG2021 User Manual
3 Ć289
The GPIB/RS-232-C status display consists of the following items: PSC,
Header, Verbose, Data and Debug.
In addition, the cumulative power-on time (Up Time) is displayed.
1. Select Misc from the bottom menu.
2. Select Status... from the side menu.
3. Select System from the sub-menu. System and GPIB/RS-232-C status data
will be displayed, as shown in Figure 3 -195.
Figure 3 Ć195: Menu Displayed When System is Selected
I/O Event Reporting. Use this item to display event reporting for the GPIB or
RS-232-C interface. See the programmer manual for more information on event
reporting.
1. Select Misc from the bottom menu.
2. Select Status... from the side menu.
3. Select I/O from the sub-menu. Event reporting will be displayed, as shown
in Figure 3 -196.
