Filter
Top Products
EDIT Menu
3 Ć180
AWG2021 User Manual
To add a step:
8. Select More 1 of 2 from the side menu and then select Append New Step.
The instrument will proceed to Step 2. See “Adding a Step” in this section.
Repeat this procedure to create the program.
Changing Parameters. It is possible to change the output parameters for a file that
has been set. Changing the output parameter values does not change the
parameters in the original file.
1. Use the z and ! buttons on the front panel or the Jump item in the bottom
menu to move to the step whose parameters you want to change.
2. Select Operation from the bottom menu.
3. Turn the general purpose knob to select the parameter to be changed.
4. Press the VALUE button on the front panel. The menu for that parameter
will appear.
5. Set the parameters as desired. See the descriptions of the individual
parameters on the following pages.
6. Select O.K. from the side menu. The parameters will be updated to the
selected items or set values. Selecting Cancel will cancel the setting
operation and the previous menu will reappear.