Filter
Top Products
Overview
2 Ć10
AWG2021 User Manual
(25) CH1 AM IN Connector This connector is used to enter an external AM modulation
waveform to CH1. With a nominal input impedance of 10 kW,
the maximum voltage of the external signal that can be entered
is ±5V.At±1 V input, 100% modulation is possible.
(26) CH2 SYNC OUT
Connector (Option 02)
The CH2 SYNC OUT connector provides a CH2 sync signal.
The output level is 1.2 V or greater with a 50 W termination.
(27) CH2 MARKER 1 OUT
Connector (Option 02)
The CH2 MARKER 1 OUT connector provides a userĆspecified
CH2 marker 1. The output level is 2.5 V with a 50 W
termination.