Filter
Top Products
EDIT Menu
3 Ć208
AWG2021 User Manual
Cutting Extraneous Frequency Components. Here is the procedure for using the
Cut under item to remove the extraneous frequency component.
1. Select Limiter from the bottom menu.
2. Press the CURSOR button on the front panel to select the left/right vertical
bar cursor. Using the numeric keys or the general purpose knob, set the
domain to remove the extraneous frequency component.
3. Press the VALUE button on the front panel. Using the general purpose knob
or the numeric keys, set the limit level for the magnitude. The limit level is
displayed at the top the screen.
4. Select Cut under from the side menu. The frequency component under the
limit level is cut.
Deleting Even or Odd Components. Here is the procedure for using the Delete
Even or Delete Odd item to delete the even component or odd component in the
discrete frequency domain.
1. Select Limiter from the bottom menu.
2. Press the CURSOR button on the front panel to select the left/right vertical
bar cursor. Using the numeric keys or the general purpose knob, set the
domain to delete the even component or odd component.
3. Select Delete Even (even) or Delete Odd (odd) from the side menu. The
even or odd component within the left and right vertical bar cursors is cut.
Figure 3 -151 shows the fundamental, even, and odd component.