Filter
Top Products
UTILITY Menu
3 Ć284
AWG2021 User Manual
Date/Time Display
Figure 3 Ć192: Date/Time Display
The following diagram shows the menu configuration for the Config... item.
Reset to Factory
Misc
Config...
Secure Erase Memory
Remote Port
GPIB
RS232C
In this section, we will discuss the Reset to Factory, Secure Erase Memory,
and Remote Port items in the sub-menu.
Factory Settings. Select Reset to Factory to reset this instrument’s settings to the
factory values.
1. Select Misc from the bottom menu.
2. Select Config... from the side menu.
3. Select Reset to Factory from the sub-menu.
4. The next message is displayed asking if it is OK to reset this instrument.
Reset to factory default.
Answer Cancel or O.K. When you select O.K., the instrument is reset to its
factory settings and the SETUP menu is displayed. Resetting the instrument to
factory default settings will not affect the data stored in the internal memory and
the non-volatile RAM (NVRam). The factory settings are listed in Appendix F.
Deleting Data From Memory. Use this item to delete the data stored in the internal
memory and the non-volatile RAM (NVRam). This will also cause all values
Configuration