Filter
Top Products
Appendix F: Miscellaneous
AWG2021 User Manual
FĆ23
Repackaging for Shipment
If this instrument is shipped by commercial transportation, use the original
packaging material. Unpack the instrument carefully from the shipping container
to save the carton and packaging material for this purpose.
If the original packaging is unfit for use or is not available, repackage the
instrument as follows:
1. Obtain a corrugated cardboard shipping carton having inside dimensions at
least six inches greater than the instrument dimensions and having a carton
test strength of at least 275 pounds.
2. If the instrument is being shipped to a Tektronix Service Center for repair or
calibration, attach a tag to the instrument showing the following: owner of
the instrument (with address), the name of a person at your firm who may be
contacted if additional information is needed, complete instrument type and
serial number, and a description of the service required.
3. Wrap the instrument with polyethylene sheeting or equivalent to protect the
outside finish and prevent entry of packing materials into the instrument.
4. Cushion the instrument on all sides by tightly packing dunnage or urethane
foam between the carton and the instrument, allowing for three inches of
padding on each side (including top and bottom).
5. Seal the carton with shipping tape or with an industrial stapler.
6. Mark the address of the Tektronix Service Center and your return address on
the carton in one or more prominent locations.