Filter
Top Products
EDIT Menu
3 Ć46
AWG2021 User Manual
When Paste from Buffer is selected, the waveform data copied into the paste
buffer with the copy processing is pasted directly before the active vertical bar
cursor. The left and right vertical bar cursors move to the two ends of the pasted
waveform data.
The paste buffer data can be inserted into a waveform or used for operations with
waveforms by selecting Insert Other Waveform or Math from the Operation
menu.
Draw Function. Draw... is used to draw points between the specified vertical bar
cursors and connect these points to create an arbitrary waveform. The following
diagram shows the menu configuration for the Draw... item.
Operation (More 1 of 3) Draw...
Smooth
Add Draw Point
Delete Draw Point
Go Back
Execute
On
Off
Figure 3 -26 shows an example of the screen with the Draw... item selected. This
figure will be discussed in the following section.