Filter
Top Products
AWG2021 User Manual
2 Ć15
Basic Menu Operation
Menu Operations
Operations (settings, procedures and selection of parameters for waveform
output) are performed on this instrument by means of the system’s menus.
When one of the menu buttons in the center of the front panel is pressed, the
menu corresponding to that button will appear. There are six menu buttons: the
five buttons used in arbitrary waveform generation mode (SETUP, MODE,
EDIT, LOAD/SAVE and UTILITY) and below them the button used in
function waveform generation mode (F.G). See Figure 2 -7.
The menu items displayed on the screen are selected by pressing the correspond-
ing bezel buttons at the bottom of the screen (hereafter referred to as bottom
buttons) or to the right of the screen (hereafter referred to as side buttons). There
are 7 bottom buttons and 5 side buttons. When one of the buttons is pressed to
select an item, that item will be displayed inverted on the screen to indicate that
it is operational. See Figure 2 -7.
F. G
MODE
EDIT
UTILITY
LOAD/SAVE
SETUP
MENU
Bottom Buttons
Side Buttons
MENU Buttons
Figure 2 Ć7: Menu Buttons and Bezel Buttons