Tekxon Technology AWG2021 Manual

A SERVICE OF

next previous

MODE Menu

AWG2021 User Manual

3 Ć239

in progress, output stops after the end point of that waveform and then the

waveform for the next step is output.

Figure 3 -166 shows the output waveform for an external trigger signal.

Table 3Ć17: Autostep File

Step File Name Output Conditions Waveform

Step:1 WAVE1.WFM Amplitude 2 V

Offset 0 V

Step:2 WAVE2.WFM Amplitude 3 V

Offset 0 V

Step:3 WAVE1.WFM Amplitude 4 V

Offset 0 V

External Trigger

Signal

Output Signal

2V

-2 V

Step:1 Step:2 Step:3

Figure 3 Ć166: Output Waveform for External Trigger Signal in Autostep Mode

Starting an Autostep Program.

1. Select Autostep from the bottom menu.

2. Choose Select Autostep File from the side menu. When this item is

selected, the list of autostep files created with the autostep editor is

displayed. See Figure 3 -167.