Filter
Top Products
Appendix C: Performance Verification
CĆ2
AWG2021 User Manual
a. First Substep
H First Subpart
H Second Subpart
b. Second Substep
2. Second Step
H Instructions for menu selection follow this format: FRONT PANEL
BUTTON!Main Menu Button!Side Menu Button. For example, “Press
UTILITY!Misc!Config...!Reset to Factory!O.K.”
H Where instructed to use a front-panel button, key, or knob, or select from the
MENU column, or from a bottom or side menu, the name of the item
appears in boldface type: “push MODE,” or “select Burst in the bottom
menu.”
Self Tests
This section describes how to use AWG2021 internal self-test routines. No
equipment is required to do these procedures. The self tests include these
internal routines:
H Diagnostics
This self-test procedure uses internal routines to verify that the AWG2021
functions, and passes the internal circuit tests.
H Calibration
The second procedure checks the AWG2021 internal calibration constants
and changes them if needed.
The internal diagnostic routines check AWG2021 characteristics such as
amplitude, offset, trigger level, clock, filters, X5 output amplifier, and attenua-
tion.
The AWG2021 automatically performs the internal diagnostics at power-on; you
can also run the internal diagnostics using the menu selections described in this
procedure. The difference between these two methods of initiating the diagnos-
tics is that the menu method does more detailed memory checking than the
power-on method.
Diagnostics