Filter
Top Products
Account Codes
82 ◆ Features Aspire Software Manual
Related Features
Abbreviated Dialing
Abbreviated Dialing bins can contain stored Account Codes. Prevent them from being dis-
played using 20-07-04.
Automatic Route Selection
ARS can force a user to enter an Authorization Code prior to using a certain route. The system
verifies the ARS Authorization Code dialed against the ARS Authorization Code list (Program
44-03).
One-Touch Calling
To simplify Account Code entry, store the Account Code (e.g., *1234*) in a One-Touch Key.
Just press the key instead of dialing the codes.
PBX Compatibility
When using Account Codes, do not use an asterisk within a PBX access code. Otherwise,
after the *, the trunk would stop sending digits to the central office.
Station Message Detail Recording
Account Codes appear on the SMDR report (even if they are hidden on the phone’s display).
Operation
To enter an Account Code any time while on a trunk call:
The outside caller cannot hear the Account Code digits you enter.
You can use this procedure if your system has Optional Account Codes enabled. You
may also be able to use this procedure for incoming calls.
This procedure is not available at SLTs.
1. Dial *.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50).
2. Dial your Account Code (1-16 digits, using 0-9 and #).
If Account Codes are hidden, each digit you dial will show an “*” character on the
telephone’s display.
3. Dial *.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50).