Filter
Top Products
Charts and Illustrations
30 ◆ Features Aspire Software Manual
Hold Code: 44
Operation: Place or
answer call + Press key
Putting a call on System Hold
(if your phone’s Hold key is
reassigned)
None -
Code: 45
Operation: Place or
answer call + Press key
Putting a call on Exclusive
Hold
None -
Hotline Code: 01 + dest. ext
Operation: Press key
Placing a call to your Hotline
partner
Full BLF (red) for
covered ext.
-
Loop Keys Code: *05 + 0
(Incoming), 1 (Outgoing)
or 2 (Both Ways) + 000
(All trunk groups incom-
ing or ARS outgoing) or
Trunk group (001-100).
Operation: Press Key
Placing or answering a trunk
call
Flashing red when
ringing
On green when in
use
Flashing green when
on hold
-
Meet Me
Conference
(Also see
Conference)
Code: 32
Operation: Press key
Joining a Meet Me
Conference
None 863 or 864
Meet Me Paging Code: 23
Operation: Press key
Joining a Meet Me Page None 863 or 864
Memo Dial Code: 31
Operation:
Store
: While on call, press
key + number to store
Use: Press Key + Call or
line
Erase: CALL + Press key
Storing, using or checking a
Memo dial number
None -
Message Waiting Code: 38
Operation: Leave mes-
sage: Call ext + Press key
OR Answer message:
Press key
Answering/Leaving a
Message Waiting
None *0
Microphone Cutoff Code: 02
Operation: Set up call +
Press key
Using Microphone Cutoff On red when
activated
-
Multiple Directory
Numbers
Code: *03 + ext. or dept
group
Operation: Press key
Placing or answering a call to
your virtual (phantom)
extension
Slow Flash red when
ringing, On red
when busy
-
Name Storing Code: 55
Operation: Press key +
ext # + name + HOLD
Entering a name for the
extension to be displayed on
telephones
None 800
Table 5: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
For this feature... Use this key... When your are... Key Lamp Status
Also See
Srvc Code