Filter
Top Products
Call Forwarding, Off-Premise
Aspire Software Manual Features ◆ 165
Trunk-to-Trunk Forwarding - DID (3) Trunk Forwarding Using DID Translation Table
(in addition to above programming)
Refer to Direct Inward Dialing (DID) for additional DID programming.
➻ 22-11-05 : DID Translation Table Number Conversion - Transfer Destination 1
22-11-06 : DID Translation Table Number Conversion - Transfer Destination 2
For each DID Translation Table entry (1-2000), specify the first and second Transfer Destina-
tions if the callers receives a busy or no answer (action defined in 22-11-04).
(Destination Options: 0 = No setting, Aspire S: 1-8, Aspire: 1-100 = Incoming Group, 102 =
In-Skin/External Voice Mail, 103=Centralized Voice Mail, 01-264 = Department Group, 400
= DID, 401 = DISA, 1000-1999 = Abbreviated Number (000-999))
If the Transfer Destinations are busy or receive no answer, those calls are transferred
to the final transfer destination (Program 22-10).
Operation
To activate Call Forwarding Off-Premise
1. At keyset, press idle CALL key + Dial *4 .
OR
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17)
OR
At SLT, lift handset Dial *4 .
2. Dial 6 + trunk access code.
Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group
(Aspire S: 1-8 or Aspire: 1-9, 01-99 or 001- 100) or #9 + Line number (e.g., 05 or 005 for
line 5.
3. Dial the outside number to which your calls should be forwarded.
4. (Keyset only) Press HOLD.
5. Press SPK (or hang up at SLT) to hang up if you dialed *4 in step 1.
Your DND or Call Forwarding (Device) Programmable Function Key flashes.
To cancel Call Forwarding Off-Premise
1. At keyset, press idle CALL key + Dial *4 .
OR
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17)
OR
At SLT, lift handset and dial *4 .
2. Dial 6 + HOLD.
3. Press SPK (or hang up at SLT) to hang up if you dialed *4 in step 1.
Your DND or Call Forwarding (Device) Programmable Function Key stops flashing.