Filter
Top Products
Charts and Illustrations
Aspire Software Manual Features ◆ 39
Code: 68 + 0-2
Operation: Press
key
Voice Mail Using Voice Mail Service Flashes slowly when
monitoring
Code: 77 + exten-
sion or Message
Center number
Operation: Press
key
Calling Voice Mail or
leaving a message
Flashes green on
your key for your
messages or flashes
red for the Message
Center
*8 or 8
Code: 78 + Conver-
sation Record
Operation: Press
key
Using Conversation Record Flashes red when
recording
Code: *01 + Trunk
number (001-200)
Operation: Press
key
Central Office Calls Pressing a line key to place or
answer a trunk call (where
trunks are 001-200)
On green when
seized, on red when
in use (by other
party), Slow Flash
green when ringing,
Hold flash when on
Hold
#9
Code: *02 + Trk
group (1-9 or 001-
200)
Operation: Press
key
Trunk Groups Using a trunk group key to
access a Trunk Group
On red when active 804
Code: *03 + ext. or
department group
Operation: Press
key
Multiple Directory
Numbers/Call Coverage
Multiple Directory Number:
Placing or answering a call
from your virtual (phantom)
extension or Call Coverage:
Placing or answering a call to
your co-worker’s extension
Slow Flash red when
ringing, On red
when busy
-
Code: *04 + orbit
(01-64)
Operation: Place or
answer call + Press
key
Park Placing a call into or
retrieving a call from a Park
Orbit
Fast Flash when
orbit is busy (green
at originator, red at
others)
#6 (Park)
*6 (pickup)
Table 6: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
Use this key... For this feature... When you are... Key Lamp Status
Also see
Srvc Code