Filter
Top Products
VoIP
Aspire Software Manual Features ◆ 661
Programming - H.323 Phone, Setting H.323 Options
To complete the H.323 phone programming, after connecting the phone to the LAN, you must con-
nect to the phone using an internet browser (such as Internet Explorer or Netscape Navigator).
1. From a PC which is connected to the same LAN as the VoIP phone, open the internet browser.
TCP/IP must be set up on the PC in order for the connection to work correctly. In the
Network Settings, under the properties of the Local Area Network setting, set the IP and
subnet mask address of the TCP/IP settings.
2. Enter the IP address for the phone to be programmed (assigned in the H.323 phone setup).
3. A screen appears requesting a user name and password. By default, the user name for the
Administrator’s level is “admin” and the password is “654321”. Enter the information and
click OK.
To enter the User level, the default user name is “user” and the password is
“123456”. The User level allows changes to:
Phone Settings The Phone Settings page allows users to read and modify gen-
eral call-related settings such as Call Duration Timer, Call Wait-
ing, and Ringer Tone Selection.
Function Keys The Function Keys page allows users to read and modify the
function key configurations (Speed Dial, Call Forward, Voice
Mail, Do Not Disturb).
Phone Book The Phone Book can be viewed and edited using the web
browser. However, if the Phone Book is opened by the user on
the phone itself, it cannot be edited through the browser.
Password Change The Password Change page allows modification of the User
password. If the browser’s Refresh button is clicked before Sub-
mit, the old password will be kept.