Filter
Top Products
VoIP
664 ◆ Features Aspire Software Manual
6. Click on the H.323 Configuration link or button.
7. Make the following changes:
● LCD Display Type = Extension_1
● Number of Lines = 1
● Extension Name = Enter the extension number to be used for the phone
● H.323 ID = Enter the extension number to be used for the phone
● CID Display Type = Select the Caller ID display mode to be used
● Suppl. Svc. Type = Select H245_Hook_Flash in order to use the Hold and Transfer features
● GK Mode = Manual
● GK IP Address = Enter the NTCPU IP address assigned in Program 10-12-01
(by default 172.16.0.10)
● Allow Calls Without GK = Yes
● Use Gateway = No
● Use Fast Start = No
Fast Start should only be used when both terminals (gateways) are using Fast Start
mode. The CODEC is then decided by the Fast Start negotiation flow. The Fast Start ele-
ments (CODEC type, VIF size, silent suppression) are compared, and based on the priority
set for each system, an option is chosen for each item. In order for a voice path to be
established, the CODEC, VIF size and silent suppression have to be the same value
between the two gateways.
8. Click the SUBMIT button to enter the changes.
The phone will reset with the new settings. Click RELOAD or REFRESH after the
phone goes to standby mode. If there are incorrect values entered in any of the fields, the
update will not be performed and the screen will be displayed again allowing for changes.
9. Close the internet browser.