Filter
Top Products
Caller ID
184 ◆ Features Aspire Software Manual
➻ 14-02-10 : Analog Trunk Data Setup - Caller ID
Enable (1) or disable (0) a trunk’s ability to receive Caller ID name/number information. If
this option is set to ‘1’, the system will suppress ringing and lamping for trunk calls for the
first ring in order to receive the Caller ID information.
➻ 14-02-16 : Analog Trunk Data Setup - Caller ID Type
Select the type of Caller ID signal from an analog trunk - FSK (0) or DTMF (1). By default,
this option is set to "0" (FSK).
➻ 15-02-08 : Multi-Line Telephone Basic Data Setup - Automatic Handsfree
Use this option to set whether pressing a key access a One-Touch Key (1) or if it pre-selects
the key (0).
➻ 15-03-09 : Single Line Telephone Basic Data Setup - Caller ID Function-For External
Module
Enable (1) or disable (0) the Caller ID FSK signal for an external Caller ID module or a 3rd
party vendor phone with Caller ID display. If voice mail is used, this setting must be disabled
or the system integration codes for disconnect will be incorrect. For Caller ID Sender Queu-
ing, set this option to “1”.
➻ 15-03-10 : Single Line Telephone Basic Data Setup - Caller ID Name
Determine if a SLT extension user’s phone should display the Caller ID name (0 = Disable, 1
= Enable).
➻ 15-03-11 : Single Line Telephone Basic Data Setup - Caller ID Type
Select the type of Caller ID signal sent from an SLT extension port - FSK (0) or DTMF (1).
By default, this option is set to "0" (FSK).
➻ 15-07-01 : Programmable Function Keys
Assign an Outgoing Call Without Caller ID (ISDN) function key (63) or a Caller ID Log His-
tory key (08) if needed.
➻ 20-01-03 : System Options - DSP Sender Resource Selection
For the Aspire M/L/XL only, set the DSP Sender Resource Selection to "1" (Caller ID Sender)
when using the Caller ID Sender Queuing feature.
➻ 20-02-08 : System Options for Multi-Line Telephones - LCD Display Holding Time
This timer determines how long a user’s display will show Caller ID for a second incoming
call (0-64800 seconds).
➻ 20-02-15 : System Options for Multi-Line Telephones - Caller ID Display Mode
Determine how the Caller ID should be displayed for all i-Series telephones when an incom-
ing call is received. Once the call is answered, the first line will indicate the trunk number and
caller timer (if enabled).
0 = Displays the line number on line one and the Caller ID name and number
on line 2.
1 = Line 1 displays Caller ID number, Line 2 displays Caller ID name
2 = Line 1 displays Caller ID name, Line 2 displays Caller ID number
➻ 20-06-01 : Class of Service for Extensions
Assign Class of Service (1-15) to extensions.
➻ 20-08-15 : Class of Service (Outgoing Call Service) - Block Outgoing Caller ID
Allow (1) or prevent (0) a user’s Class of Service from automatically blocking outgoing Caller
ID information when a call is placed. If allowed (i.e., block enabled), the system automati-
cally inserts the Caller ID block code *67 (defined in Program 14-01-21) before the user
dialed digits (this requires Program 14-02-10 to be enabled). If prevented (i.e., block dis-
abled), the system outdials the call just as it was dialed by the user.
➻ 20-09-02 : Class of Service Options (Incoming Call Service) - Caller ID Display
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to display
incoming Caller ID name/number information.