Filter
Top Products
Program 20 : System Option Setup
20-01 : System Options
Aspire Software Manual Programming ◆ 955
Program 20 : System Option Setup
20-01 : System Options
Description
Use Program 20-01 : System Options to set various system options.
Input Data
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
Item
No.
Item Input Data Default
Related
Program
01 Operator Access Mode
Use this program to set up priority of a call when calling an operator
telephone.
0 20-17
02 Selectable Text Message Mode
Use this program to select the mode when calling the telephone
which has enabled a Selectable Text Message.
Note: Any extensions previously set with Selectable Display Mes-
saging must cancel the feature and reactivate in order for a change
in this option to take affect.
0 = Call mode
1 = No Answer/
Busy mode
1 11-11-14
15-07-08
03 DSP Sender Resource Selection
Wth the Caller ID Sender Queuing feature, set the DSP Sender
Resource Selection to "1" (Caller ID Sender).
0 = Conference
1 = Caller ID
2 = MFC
0
04 Network BLF Indication
Used to determine how often the system updates the DSS key BLF
indications.
For Networking, the entry should be “30” in all systems.
0-64800 in 100
ms increments
0 30-05
05 DTMF Receive Active Time
For OPXs, analog telephones and certain analog trunks (like DISA),
the system attaches a DTMF receiver to the port for this interval.
The system releases the receiver after the interval expires.
0-64800 seconds 10 25-07-01
06 Alarm Duration
This interval sets the duration of the alarm signal.
0-64800 seconds 30
07 Callback Ring Duration Time
Callback rings an extension for this interval.
0-64800 seconds 15 11-12-05
15-07-35
08 Trunk Queuing Callback Time
Trunk Queuing callback rings an extension for this interval.
0-64800 seconds 15 11-12-05
15-07-35
09 Callback/Trunk Queuing Cancel Time
The system cancels an extension’s Callback or Trunk Queueing
request after this interval.
0-64800 seconds 64800 11-12-05
15-07-35
10 Trunk Guard Timer
- Not Used -
0-64800 seconds 1