Filter
Top Products
Voice Response System (VRS)
Aspire Software Manual Features ◆ 635
➻ 22-14-04 : VRS Delayed Message for IRG, 2nd Waiting Message Number
For each Ring Group, select the message number to be played as the second message
(0-49). This program is also used for VRS Waiting Message.
➻ 22-14-05 : VRS Delayed Message for IRG, 2nd Waiting Message Sending Count
For each Ring Group, set the number of times the first message will be played (0-255). This
program is also used for VRS Waiting Message.
➻ 22-14-06 : VRS Delayed Message for IRG, Tone Kind at Message Interval
For each Ring Group, determine what the caller will hear between messages (0=ring back
tone, 1=MOH, 2=BGM). This program is also used for VRS Waiting Message.
➻ 22-14-07 : VRS Delayed Message for IRG, Disconnect Time
For each Ring Group, set how long the system will wait after playing the VRS message before
disconnecting the call. To prevent the call from disconnecting, set this option to “0”. This pro-
gram is also used for VRS Waiting Message.
➻ 22-15-01 : VRS Waiting Message for Department Group, 1st Waiting Message Start
Time
For each Department Group, set how long the system waits before playing the first message
(0-64800 seconds). This program is also used for VRS Waiting Message.
➻ 22-15-02 : VRS Waiting Message for Department Group, 1st Waiting Message Number
For each Department Group, select the message number to be played as the first message
(0-49). This program is also used for VRS Waiting Message.
➻ 22-15-03 : VRS Waiting Message for Department Group, 1st Waiting Message Sending
Count
For each Department Group, set the number of times the first message will be played (0-255).
This program is also used for VRS Waiting Message.
➻ 22-15-04 : VRS Waiting Message for Department Group, 2nd Waiting Message Number
For each Department Group, select the message number to be played as the second message
(0-49). This program is also used for VRS Waiting Message.
➻ 22-15-05 : VRS Waiting Message for Department Group, 2nd Waiting Message Sending
Count
For each Department Group, set the number of times the first message will be played (0-255).
This program is also used for VRS Waiting Message.
➻ 22-15-06 : VRS Waiting Message for Department Group, Tone Kind at Message Interval
For each Department Group, determine what the caller will hear between messages (0=ring
back tone, 1=MOH, 2=BGM). This program is also used for VRS Waiting Message.
➻ 22-15-07 : VRS Waiting Message for Department Group, Disconnect Time
For each Department Group, set how long the system will wait after playing the VRS message
before disconnecting the call (0-64800 seconds). To prevent the call from disconnecting, set
this option to “0”. This program is also used for VRS Waiting Message.
➻ 24-02-03 : System Options for Transfer - Delayed Call Forwarding Time
Set how long a telephone with Personal Greeting options 2 or 6 enabled will ring before the
call reroutes to the programmed destination.
➻ 25-02-01 : VRS/DISA VRS Message
For each Night Service mode, enter 1 at the “Talkie” prompt if trunk should be automatically
answered by VRS and the message number the caller should hear (1-48).
➻ 25-03-01 : VRS/DISA Transfer Ring Group With Incorrect Dialing
Set the destination that Automated Attendant (OPA) calls ring if the OPA caller dials an incor-
rect extension number. This also sets the options for DISA calls. The system allows Ring
Groups, In-Skin/External Voice Mail, Centralized Voice Mail or Disconnect=0.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail