Filter
Top Products
Central Office Calls, Placing
Aspire Software Manual Features ◆ 223
Operation
To place a call over a trunk group:
1. At keyset, press idle CALL key.
OR
At single line set, lift handset.
2. Dial 804.
3. Dial line group number (Aspire S: 1-8, Aspire: 1-9 or 001-100).
4. Dial number.
OR
1. At keyset, press trunk group key (PGM 15-07 or SC 851: *02 + group).
Also see the “Loop Keys” feature.
2. Dial number.
To place a call using Trunk Group Routing:
1. At keyset, press idle CALL key.
OR
At single line set, lift handset.
2. Dial 9.
If your system has an Alternate Trunk Route Access code, you may dial that instead.
3. Dial number.
OR
1. At keyset, press Trunk Group Routing key (PGM 15-07 or SC 852: *05).
Also see the “Loop Keys” feature.
2. Dial number.
To place a call over a specific trunk:
1. At keyset, press idle CALL key.
OR
At single line set, lift handset.
2. Dial #9 .
3. Dial line number (e.g., 005 for line 5).
4. Dial number.
OR
1. At keyset, press line key (PGM 15-07 or SC 852: 001 to 200).
Also see the “Loop Keys” feature.
2. Dial number.
To Busy Out a Trunk from Outbound Usage:
1. CALL1 + 145 + trunk number (001-200) + 1.
The user which busied out the trunk will still have access to it. All other users will be
blocked from seizing it to place an outgoing call. The trunk, however, can still be answered
by any users programmed with the trunk access.
To Remove a Trunk from a Busied Out State:
1. CALL1 + 145 + trunk number (001-200) + 0.